Simex manufactures gate valves, which are devices used to control the flow of fluids. These valves feature a sliding gate that moves up and down to open or close the passage, providing reliable and efficient fluid control in various industrial applications.
| No | DESCRIPTION | MATERIAL | Qty |
|---|---|---|---|
| 01 | Body | Astm A 216 Gr.Wcb | 1 |
| 02 | Bonnet | Astm A 216 Gr.Wcb | 1 |
| 03 | Wedge | Aisi 304 / Aisi 316 /13% Cr. S.S. | 1 |
| 04 | Seat Ring | Aisi 304 / Aisi 316 /13% Cr. S.S. | 1 |
| 05 | Stem | Aisi 304 / Aisi 316 /13% Cr. S.S. | 1 |
| 06 | Gland | Aisi 304 / Aisi 316 /13% Cr. S.S. | 1 |
| 07 | Yoke Sleeve | Al Bronze / Ni – Resist | 1 |
| 08 | Back Seat Bush | Aisi 410 | 1 |
| 09 | Gasket | Spiral Wound Metalic Gasket | 1 |
| 10 | Gland Packing | Metalic Wire Reinforced Graphited Asbestos | – |
| 11 | Bonnet Stud & Nut | Astm A 193 Gr. B7 Astm A 193 Gr. 2H | – |
| 12 | Eye Bolt & Nut | Astm A 193 Gr. B7 Astm A 193 Gr. 2H | 2 set |
| 13 | Hand Wheel | C.I. / C.S. | 1 |
| 14 | Hand Wheel Nut | Carbon Steel | 1 |
| Suitable For | ||||
|---|---|---|---|---|
| Steam | Water | Oil | Air | Gases |
| • | • | • |
| Size | CLASS-150 | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| IN | M.M | A | B | ØC | ØD | ØM | N | PCD | OJ |
| 1″ | 25 | 127 | 11.0 | 51 | 108.0 | 16 | 4 | 79.2 | 123 |
| 1.½” | 40 | 165.1 | 14.2 | 73 | 127.0 | 16 | 4 | 98.5 | 152 |
| 2″ | 50 | 177.8 | 15.7 | 92 | 152.0 | 19 | 4 | 120.6 | 203 |
| 2.½” | 65 | 190.5 | 17.5 | 105 | 178.0 | 19 | 4 | 139.7 | 203 |
| 3″ | 80 | 203.2 | 19.0 | 127 | 190.5 | 19 | 4 | 152.4 | 254 |
| 4″ | 100 | 228.6 | 24.0 | 157 | 229.0 | 19 | 8 | 190.5 | 305 |
| 5″ | 125 | 254.0 | 24.0 | 186 | 254.0 | 22 | 8 | 215.9 | 305 |
| 6″ | 150 | 266.7 | 25.0 | 216 | 279.0 | 22 | 8 | 241.3 | 356 |
| 8″ | 200 | 292.1 | 28.5 | 270 | 343.0 | 22 | 8 | 298.4 | 356 |
| 10″ | 250 | 330.2 | 30.0 | 324 | 406.0 | 25 | 12 | 362.0 | 406 |
| 12″ | 300 | 355.6 | 32.0 | 381 | 483.0 | 25 | 12 | 431.8 | 457 |
| 14″ | 350 | 381.0 | 35.0 | 413 | 534.0 | 28 | 12 | 476.2 | 508 |
| 16″ | 400 | 406.4 | 36.5 | 470 | 597.0 | 28 | 16 | 539.7 | 508 |
| Primary Service Rating & Test Pressure | |||
|---|---|---|---|
| Class | Working Press | Temp. | (Hyd.Test Press.) Body Seat |
| 150 | 150 PSIG | 500°F | 425 PSIG 300 PSIG |
| 300 | 300 PSIG | 800°F | 1100 PSIG 800 PSIG |
| Air Test – Seat 80 PSIG ± 10 PSIG | |||
| Size | CLASS-300 | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| IN | M.M | A | B | ØC | ØD | ØM | N | PCD | OJ |
| 1.½” | 40 | 190.5 | 20.5 | 73 | 155.4 | 22 | 4 | 114.3 | 152 |
| 2″ | 50 | 215.9 | 22.0 | 92 | 165.0 | 19 | 8 | 127.0 | 203 |
| 2.½” | 65 | 241.3 | 25.0 | 105 | 190.5 | 22 | 8 | 149.3 | 203 |
| 3″ | 80 | 282.5 | 28.5 | 127 | 209.5 | 22 | 8 | 168.1 | 254 |
| 4″ | 100 | 304.8 | 32.0 | 157 | 254.0 | 22 | 8 | 200.1 | 305 |
| 5″ | 125 | 381.0 | 35.0 | 186 | 279.4 | 22 | 8 | 234.9 | 356 |
| 6″ | 150 | 403.2 | 36.5 | 216 | 317.5 | 22 | 12 | 269.7 | 356 |
| 8″ | 200 | 419.1 | 41.0 | 270 | 381.0 | 25 | 12 | 330.2 | 406 |
| 10″ | 250 | 457.2 | 48.0 | 324 | 444.5 | 29 | 16 | 387.3 | 457 |
| 12″ | 300 | 501.6 | 51.0 | 381 | 520.7 | 32 | 16 | 450.8 | 508 |
| 14″ | 350 | 762.0 | 54.0 | 413 | 584.2 | 32 | 20 | 514.3 | 508 |
| 16″ | 400 | 838.2 | 57.0 | 470 | 647.7 | 35 | 20 | 571.5 | 508 |